DAT2020-UV-250 FAR-UVC DISINFECTION CHAMBER – 3 X 250 W 18″ LAMPS

A disinfection chamber that sets up and tears down in seconds and is extremely flexible relative to placement and ease of use. Put safety glasses on as supplied by the on-scene coordinators. Slowly walk through the tunnel doing a simple slow complete 360 degree turn of some 3-4 seconds in each direction with hands elevated (know as a ‘TSA’ slow turn) meant to take approx. 15 seconds for the DAT2020-UV-250. All COVID/airborne viruses on all exposed surfaces of anything including equipment, skin, etc. will be destroyed *If a person is sick with COVID/another virus they will still be sick. Ideal for hospital workers, first responders in PPE, victims, stadiums, airports, train stations, and so on. Passage through the disinfection chamber allows for a small safe dosage of 222 nanometers (nm) of Far UV ultra-violet light* to inactivate over 90 % of all surface contaminants on the body and clothing. **Further there are multiple international studies that indicate clearly Far UV 222nm does not damage the eyes or skin. Includes 3 – 250 watt channel 5.3 lb Far-UV Sterilray™ 18” lamps (110V 60 hz) and 3 Power supply boxes (12” X 12” X 5” – 11.8 lbs) in a proven FSI Chamber – the ‘DAT2020-UV’ – a pneumatic, approx. 7 ft L X 7 W X 8 ft H (2.13 M X 2.13 M X 2.4 M) –50 sq. ft. (4.5 M2) 60 lbs. (28 Kg) shelter. Includes 2 roll up windows – one on each side, 1 skylight, full closure exit doors on each end, 1 air inflation/deflation valve, one high pressure air fill valve and air inflation hose w. safety cord, 1 pressure relief valve, 4 metal stakes and ground anchor points, one 19”/48 cm HVAC Hanging Duct, 1 small electrical duct, Tie Down Ropes and 4 D-rings to tie off to, Repair kit, manual, shelter sleeve, 2 upper air vents, and hammer. All canopy walls are velcroed to the floor air berms for air lock, and reflective striping is found on the upper air vents above doors and on entry and exit air berms. Carton size approx. = 134 X 73 X 48 cm (53” L X 29” W X 19” H). Walk through design with Velcro attached yet removable floor. Complete with all valving and an electric 110V 60 Hz (220V/50Hz on request), P-EID inflator deflator with locking hands free inflation device, high pressure compressed air fill hose and universal SCBA adapter; repair kit; manual.
Request a Quote

No prices displayed. Your RFQ will be routed to FSI North America®, who will connect you with an authorized distributor for your region.

NFPA 1851 Compliant
All FSI showers are ideal for firefighter wash-down / decontamination immediately after exiting the fire scene and prior to removal of any PPE.
OSHA Compliant
FSI shower systems comply with OSHA 29 CFR 1910.120 (HAZWOPER) and help meet the OSHA heat-illness requirement of water, rest, and shade.
ANSI/ISEA 113 Compliant
All FSI Portable Hazmat Decon Shower Systems conform to ANSI/ISEA 113 — American National Standard for Fixed and Portable Decontamination Shower Units.
💬 Need assistance?
Not sure which configuration is right for your scenario? Our team can identify the right system for your requirements.Contact FSI North America →📞 +1 (440) 949-2400
🛒 Purchasing This Product
All FSI® products are purchased through authorized distributors, GSA Holders, and Prime Vendors.Find a Distributor →Submit an RFQ →
Compatible Accessories · 5 items

Build your configuration

DAP448

Decon Pool

FSIHeat19

19 GPM Water Heater

F-WSP33AA

30 GPM Waste Pump

P-EIDH

Electric Inflator

F-HD-50

Wastewater Bladder

Product Imagery · Photos
Click any to expand