Water Heating Systems

FSI Heat 200A

FSI Heat 200A Multi-Fuel Water Heater is a wheeled cart like unit – 440,000 btu, 14 gpm/56 LPM total flow rate, multi fuel capable (diesel # 1, 2, JP4, JP8, home heat oil, kerosene), portable water heater. It includes a Hot/Cold water mix valve with built in anti-scald mechanism, 3 – GHT water outlet with shutoff valves, in-line analog temperature gauge, and a 5 gallon/20 L container for fuel. Max temperature: 210° F/99° C; Power requirement: 115V/1 Ph/60 Hz, 15 amps (also available in 220V models); Water Input connection: Single GHT; Water output connection; Weight: 330LBS/150 Kg.; Fuel: Diesel# 1 or 2, JP4, JP8, Home Heating Oil, Kerosene. Major components – Burner and Controls UL listed to comply with ANSI/UL296 and certified to the CAN/CSA B140.0. Accepted by N.Y.C. M.E.A. Options: Booster pump also offered P.O.A. 10ft fuel line extension to allow connection to an external fuel source – priced P.O.A.

Also available in 35 GPM configuration as the FSI Heat 200A-35.

FSI Heat 200A-35-1

FSI Heat 200A-35-1 5 (five) 3/4″ outlet – 35 gpm rated total water heater with a 45 degree temperature rise from incoming water temp. multi fuel capable  (diesel # 1, 2, JP4, JP8, home heat oil, kerosene) water heater on 4 wheeled cart.  It includes a Hot/Cold water mix valve with built in anti-scald mechanism, 5 – GHT water outlet with shutoff valves, in-line analog temperature gauge, and a 5 gallon/20 L fuel tank.   Max temperature: 210° F/99° C; Power requirement: 115V/1 Ph/60 Hz, 15 amps (also avail. in 220V models); 900,000 BTU, 3,000 lb load capacity, W 39″ X L 51-72″ adj, 18.5″ HD pneumatic tires certified to the ETL listed standard and certified to the CAN/CSA STD  B140.11.  Options:  Booster pump also  P.O.A.  10 ft fuel line extension to allow connection to an external fuel source – priced P.O.A.

FSI Heat 200A-HRC

Heater replacement coil.

F-EF1

Exhaust flue kit, with rain cap. Approx 24″ tall. 

FSI HEAT 200S

Stove pipe double walled stack and draft diverter for FSI HEAT 200A as above.

F-ECC75WH

The F-ECC75WH is a liquid propane, portable wheeled, 3 gpm/180 GPH (12 liters/720 mph), 75,000 BTU tankless water heater unit complete; includes an electronic ignition powered by 2 “D” cell batteries; ideal operating range 20~80 PSI; may also be used with modified water systems such as a 12-volt pump; approx. 48 lbs./22 Kg w. cart, adjustable temperature controls, 13” L X 15”W X 40” H/33 X 38 X 101 cm; 20 Minute automatic safety shutoff timer; includes 1 cart – 1 Stainless steel rain cap – 1 Garden hose adapter – 1 CSA regulator for use with standard 20-pound (lb.)propane tank – 1 Chrome shower head w. stainlesssteel hose; Energy Factor rating 79%; Rated heat input: 20kw; Rated gas pressure: 11″ of water column; Drain and store when not in use; Functional to 5,000’ elevation; Can increase water temp. by approx. 38 degrees; 3/4” gas and water fittings w. Shut offs included; Water heater alone is 17.5 lbs and 15” W X 35” L X 6.5” D. Available to ship immediately from FSI®.

F-ECC150WH

The F-ECC150WH Water Heating System replaces the 5 gallon per minute F-Z100WH, and is a portable wheeled, 150,000+ BTU propane powered unit (propane tank not included), 65 LBS./30Kg w. cart.10” D X 16” W X 40” H (25 X 40 X 101 cm), approx. Approx. 6.0 gpm/360 gallons per hour (24 lpm/1,440 lph) of heated water FSI does not recommend for use with other than the smaller DAT® series showers such as the DAT®1010S/2020S/2525S/2626S. Available to ship immediately from FSI®.

Scroll to Top