Aluminum Frame Decon Showers
DAT® AL SERIES™ ‘Quick Erect’ Framed Showers General Set up and Tear down Instructions:
All parts are pre-assembled with no special tools required. Frame pop up shower system is made of interconnected aluminum tubes that fold out in a scissor type movement.
To ‘Quick Erect’- place the floor cover in the designated area and then place the closed/folded up DAT® AL™ series unit in the center of the floor cover. With 2-4 support personnel (size of unit dependent) have personnel grip each corner. Pull the width support frames slowly until unit is fully open and fits floor cover exactly. Then from underneath – lift the center of the tent upwards until the two sides reach the ground almost perpendicular to one another. Clip the buckles together at the four corners (inside of the frame) while supporting the center of the tent in the air. Check/final position canopy and affix floor with HD velcro attachments. Commence use.
Standard color is a blue color designated as FSI Blue® exterior w. high visibility white inside color. Green, White, and Tan/Sand exterior canopy color also available at no extra cost. Other colors available P.O.A.
Multiple optional accessories available inclusive of air and water heaters, air coolers, elevation grids, waste water pumps, etc. are available.
2 Line Mass Casualty Decon Shower System that can handle two non-ambulatory stretchers or 4 ambulatory personnel or combinations or the above. See DAT3030S for comparable pneumatic model.
Specifications – 8.5′ L X 12′ W X 8.25′ H 102 sq. ft. approx. 170 lbs. Packed dimensions – 45″ X 45″ X 55″
4 line 3 or 4 Mass casualty Decon Shower System, decons 4 non-ambulatory, 4 to 8 ambulatory, or any combination, Undress/Detergent Shower/Rinse Shower/Redress configuration. See DAT4070S for comparable pneumatic model.
Specifications – 23.5′ L X 12′ W X 8.25′ H – 282 sq ft. – Approx. 390 lbs. – Packed dimensions – 58″ X 58″ X 68″5′ L. Undress and redress areas – 14.5′ L detergent and rinse shower areas.
2-Line 3 or 4 stage Mass Casualty Decon Shower System. Undress/Detergent Shower/Rinse ShowerRedress configuration. Decon 2 to 4 ambulatory personnel, 2 non-ambulatory or any combination at one time. See DAT3535S for comparable pneumatic model.
Specifications – 11′ L X 12′ W X 8.25′ H – 132 sq ft. – Approx. 260 lbs. – Packed dimensions – 48″ X 48″ X 58″
3 line 3 or 4 stage Mass Casualty Decon Shower System can decon 3 to 6 ambulatory, 3 non-ambulatory, or any combination. Undress/Detergent Shower/Rinse Shower/Redress configuration. See DAT3060S for comparable pneumatic model.
Specifications – 18.5′ L X 12′ W X 8.25′ H – 222 sq ft. – Approx. 365 lbs. Packed dimensions – 58″ X 58″ X 68″4.9′ L undress area/4.9′ L detergent shower area/4.9′ L rinse shower area/4.9′ L redress area.
One person Portable Hazmat Decon Shower unit complete, weighs approx. 95 lbs. and comes with 7 spray nozzle heads and a single multi function trigger gun. See DAT1010S for comparable pneumatic model.
Specifications – 3.5′ L X 3.7′ W X 8.25′ H – 13 sq ft. Packed dimensions – Approx. 40″ X 40″ X 20″
First Responder Portable Hazmat Decon shower system. Comes with 7 spray nozzle heads and one multifunction trigger gun.See DAT2020S for comparable pneumatic model.
Specifications – 6′ L X 8′ W X 8.25′ H – 48 sq ft. Approx. 119 lbs – Packed dimensions – 40″ X 40″ X 47″
First Responder Ambulatory Decon shower system with 6 spray nozzles and 2 trigger gun with coiled hoses. See DAT2525S for comparable pneumatic model.
Specifications – 6′ L X 12′ W X 8.25′ H – 72 sq ft. Approx. 210 lbs. Packed dimensions – 40″ X 40″ X 52″ with 4′ Undress/4.4′ Shower/4′ Redress areas.