Temporary Emergency Air Structures (TEAS®) Inflatable Shelters
Related Links & Information
FSI DAT Series Air Inflatable/Pneumatic Shelters (TEAS®)
Measured inside to inside – outside to outside add approx. 1.5 – 2 ft. in length and width. All decontamination air tent measurements are approximate only.
Standard air tent color is ‘FSI Blue’®. ‘Army’ Green, ‘Red Cross’ White, Red, and Military ‘Tan/Sand’ also offered at no added charge. Other colors available at 15% upcharge/unit.
FSI® strongly recommends the purchase and use of ground sheets with every portable shower or shelter for maximum protection and longevity.
NOTE – Shelter pictures are for general reference, appearance of actual product will vary based on customer-selected specifications.
FSI® DAT® SERIES PNEUMATIC SHELTER SYSTEMS
Air pressure internally once inflated = 4.3 psi (0.3 bar)
USA Federal Standard FS # 191 5041/5102/5134/5970 Test method structural test results
Total Weight (g/m2) – 1055 Thickness (mm) – 0.90
Cut strip tensile strength (lbs. /in.) – Warp = 450 – Weft = 404
Elongation (%) – Warp = 30 – Weft = 47 Tongue tear (lbs.) – Warp = 87 – Weft = 100
Adhesion (lbs. /in.) – Warp = 9.4 – Weft = 8.9 Density = 30 X 24.5
Frame: Heavy Duty 1100 Dtex* polyester coated w. plastomer on both sides, UV/Chemical resistant, quadruple overlapped and glued.
Canopy: Heavy duty 100% nylon twill (3/5) w. PU white pigment inner coating, ABT. 0 23mm X 57/58. Wt. AB1.230GR/Sq. M – UV/chemical resistant/fire retardant – UV resistant and water repellent w. a hydrostatic resistance of 250 psi + – Mildew resistant to meet and exceed US Fed. Test MIL.STD.810E 508 – Fire resistance meets and exceeds CPAI 84 SECTION 5 1995, US Fed. Test CFR.1610, meets NFPA701 Flammability Test method 1 (2004), NFPA 702 w. ‘A’ burn scale rating. All seams double stitched and coated both sides.
Inner canopy: If applicable – of 100% NYLON 210T ANTRON W/R, POLYURETHANE COATED 57/58″, Color: White – Flame Retardant to meet ‘NFPA-701 TM-1’, Anti-fungus/Anti-mildew, opaque
Floor: PVC of 0.58mm thickness (1,000 Dtex, 18 X 18 polyester) 660 grams per sq. mm 60” W.
Standard color is ‘FSI Blue’ TM exterior w. high visibility white inside color. Green and White exterior canopy color also available as standard. Other colors optional P.O.A..
FSI® DAT® SERIES PNEUMATIC SHELTERS
All Inflatable Shelters have full privacy zipper closure and full screen zipper closure slip in and out dirty entry/clean exit doors, 2 high pressure* and 2 low pressure inflation deflation valves*, 2 pressure relief valves*, one air inflation hose w. safety cord, tie down ropes and 4 D-rings to tie off to, repair kit, manual, shelter sleeve, 2 upper air vents, and a hammer. All canopy walls are velcro’d to the floor air berms for air lock, and reflective striping is found on the upper air vents above entry and exit doors. Units can attach to a second FSI shelter or shower. Simply inflate the unit and commence use in approx. 1 – 4 minutes (size of shelter dependent). DAT3030/DAT3015 have one only high pressure, one only low pressure inflation deflation valve, one only pressure relief valve
Every shelter with a width of over 11 ft – regardless of length and overall size offers a top center air berm running the entire length of the unit at the roof line and secondary full center length air berms running on either side of the main center berm approx. 18 – 24″ off center. FSI offers a total of five 8” – 12″ diameter lateral roof support air berms – size of shelter dependent. FSI shelters lead the industry in terms of weight/snow bearing capabilities/strength. Whatever the specification at hand FSI meets and exceeds herein.
Every FSI® DAT® series tent shelter comes complete with electric inflator/deflator, and high pressure compressed air fill hose and universal high pressure scba fitting.
All units supplied w. no charge redundant features allowing for – hanging undress/redress kits etc. on the inlet and outlet side.
All DAT® series shelters available with cross and center divider curtains, side doors, extra windows, skylights, HVAC/clothing ducts with ties, etc. as per published FSI literature/pricing/specs.
Multiple optional accessories available inclusive of air heaters, air coolers, elevation grids, waste water pumps, etc. available.