 |
 |
 |
|
The DAT®6120SS features a complete outer canopy and removable decon pool, removable shower fixtures and curtain lines allowing this same system to be converted into a 262 sq. ft. command or other use shelter system in minutes. With a pre-installed plumbing system, quickly convert the shelter into a shower system. just install decon pool and shower heads and curtains in approx. 5 minutes and have a 3 line 3 or 4 stage Mass Casualty Decon Shower System that can decon 3 to 6 ambulatory, 3 non-ambulatory, or any combination. Undress / Detergent Shower / Rinse Shower / Redress configuration. 5' L undress area / 5' L detergent shower area /5' L rinse shower area / 5' L redress area. As a shelter simply remove decon pool / shower heads / shower curtains as desired in approx. 5 minutes and have a complete 262 sq. ft. shelter system complete with outer canopy and inner insulating canopy that is ready for use. Approx. 13' W X 20' L x 9' H, 260 sq. ft., 395 lbs. DAT3060S sized 3 line shower system when so configured.
Shower / Shelter Setup HD
Shower / Shelter Teardown Instructions HD
- Dimensions - Approx.13′W X 20′L X 9′H
- Area - 260 sq. ft.
- Weight – 395 lbs
DAT® Pneumatic Shelters
General Specifications
|
|
|
 |
|
 |
|
|
|
 |
|
 |
|
Features
- Heavy Duty Air Berms – FSI utilizes extremely heavy duty air berm construction in all DAT® series combination decon shower / shelter systems. FSI uses the same 1100Dtex, quadruple overlapped and glued berms found in our wide range of transom rescue boats – known for the extreme conditions they are subjected to.
- Extremely Rapid Deployment – FSI Combination Shower / Shelters systems are compact, fully integrated, and supplied complete in a heavy duty carry sleeve/bag. These systems inflate virtually unaided – with the use of compressed air, or via a supplied electric inflator / deflator with a hands-free connector within minutes (size of unit and method of inflation dependent). These units are meant to be deployed simply and quickly – with modest training and few personnel.
- Heavy Duty Construction – No matter which model or size, FSI shower / shelter systems offer incredible stability even in high wind conditions up to 70 mph (115 kph) and more when properly tied down/staked off.
- ANSI #113 COMPLIANT - IDEAL FOR GROSS DECON PER NFPA1851
|
|
|
|
|
|
|