 |
 |
 |
|
The DAT®6100SS features a complete outer canopy and removable decon pool, removable shower fixtures and curtain lines allowing this same system to be converted into an approx. 150 sq. ft. command or other use shelter system in minutes. With a pre-installed plumbing system, quickly convert the shelter into a shower system, just install decon pool, shower heads and curtains in approx. 5 minutes and have a 2 line, 3 or 4 stage Mass Casualty Decon Shower System, approx. 10' W X 15' L X 9' H, 290 lbs., Undress / Detergent Shower / Rinse Shower / Redress configuration. Decon 2 to 4 ambulatory personnel, 2 non-ambulatory or any combination at one time. Each line is 4' undress, 7' detergent / rinse shower area, 4' redress section. As a shelter simply remove decon pool / shower heads / shower curtains as desired in approx. 5 minutes and have a complete 150 sq. ft. shelter system complete with outer canopy and inner insulating canopy that is ready for use. DAT3535S sized 2 line decon shower system when so configured.
Shower / Shelter Setup HD
Shower / Shelter Teardown Instructions HD
- Dimensions - Approx.10′W X 15′L X 9′H
- Area - 150 sq. ft.
- Weight – 290 lbs
DAT® Pneumatic Shelters
General Specifications
|
|
|
 |
|
 |
|
|
|
 |
|
 |
|
Features
- Heavy Duty Air Berms – FSI utilizes extremely heavy duty air berm construction in all DAT® series combination decon shower / shelter systems. FSI uses the same 1100Dtex, quadruple overlapped and glued berms found in our wide range of transom rescue boats – known for the extreme conditions they are subjected to.
- Extremely Rapid Deployment – FSI Combination Shower / Shelters systems are compact, fully integrated, and supplied complete in a heavy duty carry sleeve/bag. These systems inflate virtually unaided – with the use of compressed air, or via a supplied electric inflator / deflator with a hands-free connector within minutes (size of unit and method of inflation dependent). These units are meant to be deployed simply and quickly – with modest training and few personnel.
- Heavy Duty Construction – No matter which model or size, FSI shower / shelter systems offer incredible stability even in high wind conditions up to 70 mph (115 kph) and more when properly tied down/staked off.
- ANSI #113 COMPLIANT - IDEAL FOR GROSS DECON PER NFPA1851
|
|
|
|
|
|
|