 |
 |
 |
|
Portable Pneumatic Hazmat Decon Shower - Approx. 20' W X 30' L X 9' H (6 M X 9 M X 2.7 M) - Shower only, 600 sq. ft. (56 M2). When all shower heads and curtains and trigger guns are installed = approx. 705 lbs./320 Kg (weight is a function of HD fabrics used to ensure longer life and stability in extreme conditions). Carton size approx. = 152 X 139 X 139 cm (60” L X 55” W X 55” H). 6 windows - three on each side, 3 skylights, 10 (ten) 17”/43 cm HVAC / clothes inlet / outlets with tie closures - 2 each per end / middle / side, 4 large 24” covered laundry ports - 2 per side in shower area, 16 metal stakes and 12 tie down ropes. Air volume approx. 300 cu. Ft; approx. 70 mph wind resistance; approx. roof load 2,600 lbs. The DAT6000S-3L is a 3 line 4 stage as standard with 5 stage if so ordered (Undress / Shower / Shower / Shower / Redress) Decon Shower System with each line being 6 ft for undress, 18 ft L for shower divided into 3 showers in privacy as desired, and 6 ft L for redress. Decon 9 ambulatory personnel; 6 non-ambulatory or any combination at one time. Complete with all valving and an electric 120V/60Hz P-EIDHD inflator deflator with locking hands free inflation device, high pressure compressed air fill hose and universal SCBA adapter; repair kit; manual; ANSI # 113 compliant. Comes with carry bag, repair kit, manual all at no added charge. Includes 1 FSI Heat 200A water heater, 1 FSI HEAT 201 detergent injector, 1 F-HSP hand sprayer, 2 F-GH hoses, 1 F-GH503510 hose system, 1 F-RS12 conveyor, 1 F-MX1 spine board, 6 F-1225-0500-STL stringable lights, 1 F-WSP33AA waste pump, 50 F-TDMSPC elevation grids, 1 F-MMU156 1.5" NST X 6 3/4" GHT outlet multi manifold, 1 F-HD600BT bladder tank, 2 F-GS1620 tarps, 2 F-EM-259A. Multiple Options available. FSI reserves right to substitute products as needed that equal / exceed specifications.
Shower / Shelter Setup HD
Shower / Shelter Teardown Instructions HD
- Dimensions - Approx. 20′W X 30′L X 9′H
- Area - 600 sq. ft.
- Weight – 705 lbs
|
|
|
 |
|
 |
|
|
|
 |
|
 |
|
Features
- Heavy Duty Air Berms – FSI utilizes extremely heavy duty air berm construction in all DAT® series mass casualty portable hazmat decon shower systems. FSI uses the same 1100Dtex, quadruple overlapped and glued berms found in our wide range of transom rescue boats – known for the extreme conditions they are subjected to.
- Extremely Rapid Deployment – FSI Portable Shower Systems are compact, fully integrated, and supplied complete in a heavy duty carry sleeve/bag. FSI Shower systems inflate virtually unaided – with the use of compressed air, or via a supplied electric inflator/deflator with a hands-free connector within minutes (size of unit and method of inflation dependent). The inflatable decontamination shower units are meant to be deployed simply and quickly – with modest training and few personnel.
- Heavy Duty Construction – No matter which model or size, FSI shower systems offer incredible stability even in high wind conditions up to 70 mph (115 kph) and more when properly tied down/staked off.
- Rapid Deploy • Easy to Setup and Use
- Decon Pool and Plumbing are Pre-installed
- Very Portable
- Many Options Available
- Small Storage Footprint
- ANSI #113 COMPLIANT - IDEAL FOR GROSS DECON PER NFPA1851
|
|
|
|
|
|
|