 |
 |
 |
|
Single Line Mass Casualty Decontamination Shower System complete. System includes 1 DAT2525S shower, 1 F-ECC150WH propane water heater, 1 FSI HEAT 201 detergent injector, 1 F-HSP hand sprayer, 1 F-GH hose, 1 F-GH503510 hose system, 1 F-RS conveyor, 1 F-MX1 spine board, 1 F-1225-0500-STL stringable light, 1 F-WSP33AA waste pump, 4 F-TDMSPC elevation grids, 1 F-HD300BT bladder tank, 1 F-GS3 tarp, 1 F-EM-259A. Multiple options available. FSI reserves the right to substitute products as needed that meet / exceed specifications.
DAT®2525S Inflates in Under 2 Minutes
- Dimensions - Approx. 7′W X 13′L X 8′H
- Area - 90 sq. ft.
- Weight – 180 lbs
|
|
|
 |
|
 |
|
|
|
 |
|
 |
|
Features
- Heavy Duty Air Berms – FSI utilizes extremely heavy duty air berm construction in all DAT® series mass casualty portable hazmat decon shower systems. FSI uses the same 1100Dtex, quadruple overlapped and glued berms found in our wide range of transom rescue boats – known for the extreme conditions they are subjected to.
- Extremely Rapid Deployment – FSI Portable Shower Systems are compact, fully integrated, and supplied complete in a heavy duty carry sleeve/bag. FSI Shower systems inflate virtually unaided – with the use of compressed air, or via a supplied electric inflator/deflator with a hands-free connector within minutes (size of unit and method of inflation dependent). The inflatable decontamination shower units are meant to be deployed simply and quickly – with modest training and few personnel.
- Heavy Duty Construction – No matter which model or size, FSI shower systems offer incredible stability even in high wind conditions up to 70 mph (115 kph) and more when properly tied down/staked off.
- ANSI #113 COMPLIANT - IDEAL FOR GROSS DECON PER NFPA1851
|
|
|
|
|
|
|