 |
 |
 |
|
DAT® Series Pneumatic Shelter - Approx. 10’ W X 5’ L X 9’ H (3 M X 1.5 M X 2.7 M) - Shelter only, 50 sq. ft. (4.5 M2) 68 lbs. (31 Kg). An ideal anteroom complete with F-FL10 hanging gusseted Velcro flaps. 2 roll up windows - one on each side, 1 skylight, full closure exit doors on each end, 1 air inflation / deflation valve, one high pressure air fill valve and air inflation hose with safety cord, 1 pressure relief valve, 4 metal stakes and ground anchor points, one 19" / 48 cm HVAC Hanging Duct, 1 small electrical duct, Tie Down Ropes and 4 D-rings to tie off to, Repair kit, manual, shelter sleeve, 2 upper air vents, and hammer. All canopy walls are Velcroed to the floor air berms for air lock, and reflective striping is found on the upper air vents above doors and on entry and exit air berms. Units function as anterooms and can attach to a 2nd FSI Shelter on each end / side. Carton size approx. = 134 X 73 X 48 cm (53” L X 29” W X 19” H).
Shower / Shelter Setup HD
Shower / Shelter Teardown Instructions HD
- Dimensions - Approx. 10′W X 5′L X 9′H
- Area - 50 sq. ft.
- Weight – 68 lbs
DAT® Pneumatic Shelters
General Specifications
|
|
|
 |
|
 |
|
|
|
 |
|
 |
|
Features
- Multiple applications - tactical, command, field hospital, medical surge capacity, temporary housing, portable morgue, athletic training / cool down, isolation, crime scene privacy shelter, anteroom, and many others
- Multiple sizes - from 50 sq. ft. to 1,850 sq. ft. (4.5M² to 172M²)
- Extremely Heavy Duty
- Canopy fabric is U.V. / chemical resistant and fire retardant
- Quick, efficient and simple to set up within 1-10 minutes (size and inflation method dependent)
- Simple valving all on entry sides via supplied P-EID / P-EID-HD inflator / deflator with locking connector, or with compressed air using supplied high pressure air fill hose and universal F-SCBAF-H high pressure adapter
- Floor and canopies attached, yet removable for ease of cleaning / repair
- Standard colors are "FSI Blue"® green, white, red and tan / sand - other colors available upon request
- All DAT® series ‘Temporary Structure’ shelters are supplied fully equipped and ready to be placed in service - Simply roll out, inflate, tie / stake down, and commence operations
- Optional cross and center divider sections offered for privacy / undress / redress / other
- Incredible stability even in high wind conditions to 70mph (115Kph) plus when properly tied down / staked off
- Options include added skylights, added windows, side man doors, added HVAC / Electrical ducts, stencils, logos, reflective striping, skylight covers, insulating inside canopies, gusseted inter-connectivity of shelters end to end or side to side, etc.
|
|
|
|
|
|
|